if you want to control the dxf filename you have to add this line in your topzwoo.cfg:
ZXZWOOSELECTION_NESTING_ENROUTE_TREE_BOM_PATH "BOM path"
toptrack 66701
Modified on: Fri, 17 Aug, 2018 at 8:59 AM
if you want to control the dxf filename you have to add this line in your topzwoo.cfg:
ZXZWOOSELECTION_NESTING_ENROUTE_TREE_BOM_PATH "BOM path"
toptrack 66701
Did you find it helpful? Yes No
Send feedback